OPEnSLogo1d.png
bodorLaser.png
fusion3.jpg
lulzbot-taz-5.png
YH-853D-5A-Multifunction-SMD-SMT-3-IN-1-Soldering-Station-Hot-Air-Gun-Station-And.jpg
OPEnSLogo1d.png

OPEnS Team


Your Team

SCROLL DOWN

OPEnS Team


Your Team

 

Dr. Selker (Left), principle investigator for the OPEnS lab, OSU distinguished professor of Biological and Ecological Engineering, and co-Director of both CTEMPs.org and TAHMO.org. His areas of expertise include soil hydrology, environmental monitoring, mechanical, analog and digital electronic design. Dr. Selker has been a professor in the department of Biological and Ecological Engineering at Oregon State University for 26 years focused on Water Resources Engineering, publishing more than 175 peer-reviewed articles.

Dr. Udell, OSU assistant professor of Biological and Ecological Engineering and Director of the OPEnS Lab. He received his PhD from the University of Florida in Music Composition and Electrical Engineering. He is Inventor of U.S. and international patents on wireless sensor technology and data protocols and CEO of a technology startup company.

Manuel Lopez is a current second year student majoring in electrical engineering at Oregon State University. He is from Hillsboro, OR and attended Liberty high school. One of his hobbies is to play the guitar, he has been playing since he was six years old. He also likes to travel and is traveling to Mexico this summer.

Mitch Nelke is a current second year student majoring in Mechanical Engineering. He is from West Linn, OR and attended West Linn High School. He competed in high school FRC and has interned at 3D Systems, and his hobbies include 3D Printing and camping/traveling.

 

OPEnS is delighted to be working with the following student research awardees:

 

Alex Grejuc is a sophomore computer science major and URSA Engage Research program recipient.

Brett Stoddard is majoring in electrical and computer engineering with a focus on analog systems and plans to minor in physics. URSA Engage and DeLoach Honors College Work Scholarship Recipient.

Marissa Kwon is a sophomore in the pre-Electrical/Computer Engineering track and URSA Engage program recipient.

Jonah Siekmann is a sophomore Computer Science major and URSA Engage Research program recipient.

Thomas DeBell is a Junior in Ecological Engineering pursing a minor in Chemistry with an emphasis on electronics, and is a recipient of the Beginning Researchers Support Program funding.

Bethany McCurley is a second year Bio-Engineering student with a passion and history in journalism.

Mitchell Moos is a Business student who bings extensive experience marketing for organizations and startups, including marketing and programs coordinator for the Oregon Residence Hall Association, UHDS.


 

 

Your Resources

Want to see a detailed list of what we have and where we got it? Check out our ongoing Master List.

bodorLaser.png

Bodor Laser Cutter Etcher


BODOR CO2 Laser Cutter Etcher

Cutting Area: 1.3m x .9m (51.18in x 35.43in)

Materials and Thickness:

Acrylic up to 1in, Polyethylene Foam, "Charcoal Foam" (polyurethane), Corrugated Cardboard, Delrin (acetal), Corrugated Polypropylene, Plywood (0.25in), CR Steel 0.028in, Stainless Steel 0.018in, HR Galv Steel 0.036in

Schedule Job Request

Bodor Laser Cutter Etcher


BODOR CO2 Laser Cutter Etcher

Cutting Area: 1.3m x .9m (51.18in x 35.43in)

Materials and Thickness:

Acrylic up to 1in, Polyethylene Foam, "Charcoal Foam" (polyurethane), Corrugated Cardboard, Delrin (acetal), Corrugated Polypropylene, Plywood (0.25in), CR Steel 0.028in, Stainless Steel 0.018in, HR Galv Steel 0.036in

Schedule Job Request

fusion3.jpg

Fusion3


Fusion3 F400-S 3d Printer

Print Area: 360mm x 365mm x 320mm (14.17in x 14.37in x 12.60in)

Top Print Speed: 250mm/sec (9.8 in/sec)

Layer Thickness: 0.05mm to 0.3mm (0.002in - 0.01in)

Current Available Materials:

ABS, PLA, NYLON 645

Schedule Job Request

Fusion3


Fusion3 F400-S 3d Printer

Print Area: 360mm x 365mm x 320mm (14.17in x 14.37in x 12.60in)

Top Print Speed: 250mm/sec (9.8 in/sec)

Layer Thickness: 0.05mm to 0.3mm (0.002in - 0.01in)

Current Available Materials:

ABS, PLA, NYLON 645

Schedule Job Request

lulzbot-taz-5.png

Luzbot TAZ5


Lulzbot Taz 5 3D Printer

Print Area: 290mm x 275mm 250mm (11.4in x 10.8in. 9.8in)

Print Volume: 199375 cm³ (1206 in³)

Top Print Speed: 200mm/sec (7.9 in/sec)

Layer Thickness: 0.075mm to 0.5mm (0.003in - 0.0196in)

Current Available Materials:

ABS, PLA, NYLON 645

Schedule Job Request

Luzbot TAZ5


Lulzbot Taz 5 3D Printer

Print Area: 290mm x 275mm 250mm (11.4in x 10.8in. 9.8in)

Print Volume: 199375 cm³ (1206 in³)

Top Print Speed: 200mm/sec (7.9 in/sec)

Layer Thickness: 0.075mm to 0.5mm (0.003in - 0.0196in)

Current Available Materials:

ABS, PLA, NYLON 645

Schedule Job Request

YH-853D-5A-Multifunction-SMD-SMT-3-IN-1-Soldering-Station-Hot-Air-Gun-Station-And.jpg

YIHUA 853D


YH-853D SMD/SMT Soldering Station

Multi function soldering station

Hot Air Gun Station

DC Power Supply

+ Electronics station, Oscilloscope, Logical State Analyzer, Misc Components

Schedule Job Request

YIHUA 853D


YH-853D SMD/SMT Soldering Station

Multi function soldering station

Hot Air Gun Station

DC Power Supply

+ Electronics station, Oscilloscope, Logical State Analyzer, Misc Components

Schedule Job Request

eMailSignup


Keep Up-to-Date With OPEnS News

eMailSignup


Keep Up-to-Date With OPEnS News